Nitto Dynamic Stem II stem on Fixed Gear

-
Managed to install the Nitto Dynamic Stem II purchased from Velosolo (fast shipping btw!) onto the Fixed. Previously the 120mm Shimano 600 + 42cm Traditional Bend Drop Bar proved to be too far forward and a tad too low. I was first a little bit adamant on the Nitto 90-degree stem but after installation, it didn't look bad at all.

I installed the Oval Concepts R701 Traditional Bend Drop Bar (44cm) as well. The setup needed new brake wires, housing and that was solved for 14 bucks at the LBS. Installation was easy but laborious; basically had to reinstall at the brake cables again due to the length issue.





The position of the bar is now just a tad higher than the haze. The stretch to the hoods, bars and drops are pretty comfortable though I think a 110mm stem would be just heaven (the current one is 120mm) as it still feels a little too far.

I took her out for a spin this morning, semi-TT style and tried out the various positions. All I can say is its now more comfortable than the previous setup. Its feels now more like the setup I have on the Haze.

This morning's run was not bad at all. Did slightly over 30km/h on a fixed gear for a full 30km.

Comments

Post a Comment

Popular posts from this blog

Tecnotrat 'Saronni' and 'Others'

-
Image
Here are a few Tecnotrat 'Saronni' and 'Others' still hard at work. Tecnotrat shipped a lot of these frames during the 1985-1989 period, badging them as Saronnis, Ferraris, Europa, a whole lot more! Tecnotrat Saronni This one's in Japan . Original paintwork intact! Same chromed fork as mine. Well maintained! Love those cages..... ( www.campyonly.com/ retrobikes/gallery.html ) Some pics of Saronni frame alone Tecnotrat 'Others' 'Europa' badged Tecnotrat, brought into Australia for Europa Cycles. She is in not too good condition but as a steel, it will be easily refurbished by its new owner. Another Europa, in better condition, serving as a dog-cage as well A well used and neglected Europa in Sydney.... Tecnotrat 'De Benardi' Probably one of the last incarnations made by Tecnotrat.... Same frame for Track Bike build....notice the rear facing drooputs Another track build... Road bike circa 2001....same steel design, campy dropouts...
Read more

2011 NTU Bike Rally - Completed!

-
Image
First 'official' ride of the year. This is the first time I participated in this event and boy, no regrets. It's a real mixed bag and I opted to try to chase the fast ones and managed to keep up. Good thing there were a lot of stop points (every 20km or so..) Garmin data as below....only tracked 140km...lost 8km of data as I forgot to switch it on upon leaving NTU rest point. 2011 NTU Bike Rally by boostbutt at Garmin Connect - Details This year, KL, Ben and I participated. We rode from our homes, met up at the usual Nicoll H'way stop and went to the F1 pit. About 1000 people signed up for the event...I think perhaps 800-900 turned up. We were mostly together during the rides until after NTU where we kinda split a bit but still meet up at the rest points. I managed to complete the last 4 stages with the fastest group (arriving at rest stops which were empty!) with the Coastal one being the most brutal as cramps started to creep in. There, I took turns with the lead guy
Read more

A Bad Week in Life, an OK Weekend for Cycling

-
Well what can I say? Bad week indeed.....my 7-month old son was hospitalized, diagnosed with Kawasaki's disease. Yes I know, wtf is that??? Well its not common but not rare as well. Its cause is still not known and there is no direct way to diagnose it....just by the prolonged fever and a couple of other symptoms. Read it up if you have kids!!! He's ok now but we are worried sick right now on that the long term effect (aftermath) of this disease will leave on his health; his heart in particular. We are going for a first scan to tomorrow (2D Echogram). Pray for us and our little boy.... Back to cycling...did a quick ride on Sat...managed to complete the usual course (about 29km) in about 64 minutes. Was really struggling to get up to speed along Changi Coast Road and tried really hard to keep at 30km/h....the aim was to do it in less that an hour! Well I failed. Only managed an average of 27.5km/h for the entire ride. Prior to the ride I had a niggling stiff neck and weird nerve
Read more